08-04-2013, 10:26 PM
(This post was last modified: 08-04-2013, 10:30 PM by solarmystic.)
(08-04-2013, 10:18 PM)XYouble3973 Wrote: The speed is approximately 50%, though it varies depending on the screen.
The laptop is set to highpower mode.
I'm running the 2 programs, but I can't tell what numbers to look at to determine if they are running at full capacity.
I haven't played any other games, so I have no idea. It seems many roms have specific settings that they need to be set at to run properly. Is there a "test rom" as such, to judge performance against?
50% Speed is not playable, I agree. If you're still getting only that speed even after everything you've done in my guide, something is very wrong.
What you need focus in CPUz is the Core Speed measurement on the 1st page. Is it fluctuating while running the game? What is the reading?
And for GPUz, head to the Sensors Tab and focus on the GPU Load, GPU Core clock and GPU Memory Clock. Also observe whether the clock speeds are fluctuating or are they running at full speed. Check whether the GPU Load is stable. Report back the readings please.
Run both those apps on the side while you're playing Danganronpa on PPSSPP.
Yes, there is a test ROM you can use, and it comes bundled with PPSSPP. It's called cube.iso, and it's located in the demos subfolder within the ppsspp folder.
Load it into PPSSPP, and report your findings when holding down the "Tab" button to unlock your speed %.
PPSSPP Modern Testbed:-
Intel Core i5 4690K @ 4.0 GHz
NVIDIA Geforce GTX 760 2GB GDDR5 VRAM @ 1138/6500 Mhz
16 GB DDR3 RAM @ 1600 MHz
Windows 7 x64 SP1
PPSSPP Ancient Testing Rig:-
Intel Core 2 Duo T9550 @ 2.8GHz
ATI Mobility Radeon 4670 1GB GDDR3 VRAM @ 843/882 MHz
8 GB DDR3 RAM @ 1066 MHz
Windows 7 x64 SP1
Intel Core i5 4690K @ 4.0 GHz
NVIDIA Geforce GTX 760 2GB GDDR5 VRAM @ 1138/6500 Mhz
16 GB DDR3 RAM @ 1600 MHz
Windows 7 x64 SP1
PPSSPP Ancient Testing Rig:-
Intel Core 2 Duo T9550 @ 2.8GHz
ATI Mobility Radeon 4670 1GB GDDR3 VRAM @ 843/882 MHz
8 GB DDR3 RAM @ 1066 MHz
Windows 7 x64 SP1

