Threaded Mode | Linear Mode

Snapems · (This post was last modified: 01-25-2014 07:27 AM by TheDax.)

Hi

I use a USB to PS1 adapter for my controller. And the control mapping does not appear to recognize it.
It's worked for every other emulator i've used (epsXe, snes9x, etc) and other games too (Like Altitude).

I go into control mapping, click +; press buttons on the controller and nothing happens. - However the keyboard works just fine.

Any ideas? - Or suggestions?

Thanks for reading!

**TheDax** · 01-24-2014, 10:32 PM

What OS are you running on?

Snapems · 01-25-2014, 04:02 AM

Windows Vista; 32bit.

**TheDax** · (This post was last modified: 01-25-2014 06:23 AM by TheDax.)

That makes this easier. Okay, go to control panel, and in the search box, type in "usb game" without the quotes. It should bring up something like "Set up USB game controllers" in the results. Open that, go to advanced, and make sure your controller is listed as the device you want to use. That's usually the main cause for this type of thing. Make sure PPSSPP is closed when you're doing this, or restart it after changing that setting, if it is open. If that doesn't work, let me know. Smile

Snapems · 01-25-2014, 06:55 AM

Impressive. Since the USB to PS1 has 2 slots; the one i was using wasn't the preferred. - But it was still working for other games, so is this an issue with ppsspp?
Anyway, Resolved.

Thanks very much! <3!

**TheDax** · 01-25-2014, 07:26 AM

I think PPSSPP only looks for the first "connected" controller, so perhaps the slot you were using wasn't the first one, but yeah, you pretty much summed it up. Happy gaming. Smile